Hey everyone ! I am sagar soni from mechanical stream and here i am representing my skills of rim designing for this i am inspired from Pirelli tyres. I would thanx to my mentor Mohit sir & Ajay sir for giving me knowledge of this software.
WHAT IS RIM -
The rim is the "outer edge of a wheel, holding the tyre". It makes up the outer circular design of the wheel on which the inside edge of the tyre is mounted on vehicles such as automobiles.
ABOUT THE REVOLVE FEATURE -
Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material. You can create the following revolve types:
• Revolved protrusion—Solid, Thickened
• Revolved cut—Solid, Thickened
• Revolved surface
• Revolved surface trim—Regular, Thickened
A revolved section requires an axis of revolution that can be created either with the section or defined by selecting model geometry.
ABOUT THE MIRROR FEATURE -
Note: You must select the items you wish to mirror before you can invoke the Mirror tool.
Select one or more features to mirror. Pro/ENGINEER highlights each feature in the graphics window.
Click in the Edit Features toolbar. The Mirror tool opens.
Note: You can also click Edit > Mirror to invoke the Mirror tool.
Select a mirror plane.
Tip: You can redefine the Mirror Plane by clicking on any other plane in the graphics window.
(Optional) If you want to make mirrored features independent of the original, open the Options slide-up panel and clear the Copy as dependent box.
Click in the dashboard to accept and create the new Mirror feature.
Note: To redefine the mirror item, you must cancel the current mirror operation. Select alternate items to mirror and then restart the mirror tool.